PDA

View Full Version : Windsheild removal?



slowfinger
10-16-2013, 12:05 PM
Can anyone refresh my memory about a 56 windshield removal tips? We removed the 3/8" garnish moulding bolts under dash. Removed as much chrome as we could around glass. Is this windshield ready to push the top out and then lift it off frame? Geo.

smooth 56
10-16-2013, 12:11 PM
You need to get all the chrome off.If the rubber is soft you can push it out if it's hard you will have to cut the old rubber then it will pop out.

chevynut
10-16-2013, 02:36 PM
The top two pieces of outside stainless will NOT come off until you remove the windshield. They're locked into the rubber gasket. You need to take the corner pieces off and all the bottom outside trim. Remove all the inside trim and pry the rubber over the lip at the top and down both sides.

Rick_L
10-16-2013, 02:51 PM
Do as Chevynut says.

If you have a recently installed gasket, you can pry the rubber over the pinch weld lip and remove the windshield without cutting the gasket. If it's an original, you'll need to cut the gasket.