PDA

View Full Version : Floor pan install



slowfinger
08-17-2014, 08:10 PM
Here's what we did this weekend, instead of fishing! 33733374337533763377 Still need to adjust pan in front, sitting a little low to body. Rear is good. Need to order the B pillars and tow pans. It's not as hard as it's made out to be! Took 4 hours messing around to get er in. Bought the sheetmetal locally. It's a goldstar pan. Very good quality. Car has been sandblasted and epoxy coated primer. Hope to get a few more pannels in it before old man winter comes around! Rebuilding the 327ci this winter. It was running when we bought it but not very well. Geo.

JT56
08-18-2014, 05:13 AM
idk about the fishing! Looks like you go a hook into something lol

carls 56 (RIP 11/24/2021)
08-18-2014, 05:31 AM
nice progress Geo. :cool:

MP&C
08-20-2014, 09:02 AM
That one piece floor sure makes short work of it! Looks good!

slowfinger
08-22-2014, 12:07 PM
Thanks guys. We are going to tack weld the front and rear pan in this weekend. The outer rockers can be last to install, I guess after the "b" pillars and toe pans? The doors still open and close ok. Thinking time to tack weld. Some of the bushings are not real tight but pan fit is good now.

slowfinger
09-23-2014, 06:26 AM
351035103511 Here's what we did on the old gal last weekend. It was buetiful weather here for it! We will be able to save the inner wheel tubs. Luckily the metal body parts guy is only 1/2 hour away! We're getting to be freinds. LOL and a little POR on the frame and diff. Hopefully it won't be so windy for welding next week. Geo.