PDA

View Full Version : Looking for Junk Mark IV Block - Dallas


BBPanel
12-25-2015, 04:26 PM
To be used for mock up - as long as I can put it on an engine stand and bolt on a pan and TC. Dallas area. Thanks. -Bob
chevynut
12-25-2015, 06:15 PM
Bob, you might want to check with some engine builders in your area and see if they have one that's not rebuildable. I picked one up for free from one of them and got some free BB heads that way too. To those guys they're just worthless boat anchors.
markm
12-25-2015, 06:22 PM
A tall deck is not a good plan unless you are going to run one.
BBPanel
12-25-2015, 08:25 PM
Bob, you might want to check with some engine builders in your area and see if they have one that's not rebuildable. I picked one up for free from one of them and got some free BB heads that way too. To those guys they're just worthless boat anchors.

Yeah, I plan to - won't be needing any heads. Ironic - I had a P-Ayr block a number of years ago - should never have let it go.
NickP
12-26-2015, 06:45 AM
If anyone is likely to have one it will be: Phone: 817.467.7171 orToll Free: 855.467.4880Fax: 817.468.3147Email: info@rehermorrison.comUSPS Mail:
Reher-Morrison Racing Engines
1120 Enterprise Place
Arlington, TX 76001