View Full Version : Question for Cnut
Fladiver64
01-27-2019, 08:17 PM
What would it take to convert my 4dr ht frame, to mount a nomad body? Is it just changing some body mounts? Thanks
BamaNomad
01-27-2019, 08:57 PM
A 4-dr sedan has the SAME body mounts as a Nomad, but I think a 4-dr HT has one or two more per side, and possibly ?? in different positions. Your service manual has the information for each body style.
chevynut
01-27-2019, 09:15 PM
The 4DHT frame is unique because the center body mount (#3 outboard), near the b-pillar, is a different length and in a slightly different location. It's longer and is about 7" further back and sits lower. All the other body mounts are the same at a 2D or 4D sedan or 6 passenger wagon including a Nomad.
http://www.55-57chevys.com/tech/57/2-11.gif
http://www.55-57chevys.com/tech/57/2-4.gif
Fladiver64
01-28-2019, 05:55 AM
Thanks
chevynut
01-28-2019, 07:55 AM
So to answer your question all one would have to do is remove the outboard #3 body mount and add a stock one from any other frame type in it's place, or fab one and locate it correctly for a Nomad. Not a big deal.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.