Yea I was just curious if anyone has ever done it probably not going to do it just wondering how it worked out I rent a small one car garage so I can't really mount the tank outside in the yard so if...
Type: Posts; User: destroyertta
Yea I was just curious if anyone has ever done it probably not going to do it just wondering how it worked out I rent a small one car garage so I can't really mount the tank outside in the yard so if...
Hey just bought a Husky 60 Gal. Stationary Electric Air Compressor that was usually $489 but this one just had some scratches and dust on it it was marked down to $244 I offered them $175 they said...
When I did the bushings on my Camaro I used polyurethane my friend suggested using powdered graphite instead of grease worked great I never heard it squeak I plan on doing the same when I do the...
Ok so I was checking the frame to see if it's square I crossed measured the four most rear body mounts don't have the exact measurement with me but it was a half inch off I know these frames are not...
Man I changed my mind so many times before I decided to go with laszlo front and rear kit. Luckily I only replaced the bushings, shocks, and leaf springs just to control some of the sloppiness but it...
I just heard the viper ones are stronger how much torq can the d44 take with mine i plan on atleast changing the gears but maybe just replace everything when the time comes mine is a stock 87 d44...
So what's the difference between the viper and the corvette Dana44 I believe the viper one is stronger is it the same case and the internals are stronger or the bat wing and everything different if...
I am going to sell what I can already sold the four speed Caitlyn Jenner lol and the leaf springs almost had the rear sold I thought it was a ford 9" but it's an 8.8 I think but the guy didn't want...
So I finally got my frame out from under the body and into the garage to do the suspension after purchasing a front and rear kit from laszlo back in 2012 hopefully I can keep a steady pace over the...
Just purchased this harbor freight 72" tool box it's got a ton of room rolls real well and draws slide nice now I just got to find a place to put it in my garage but it's a good box for the money...
Are you painting the corvette parts or just leaving them
Hey guys I started the process of removing the body off the frame after along time of not getting to it took the front suspension off and removed the rear today i got the jack stands under the frame...
I have the mig 175 and it works great I brought it to work and one of the guys dropped a 4" I beam on it just damaged the cover and broke the adjustable wire feed knob on it Eastwood sent me the...
thanks guys for the info i guess if i want it real thick i will just do a buch of coats i will check out that raptor spray
bam did that kit cover the whole bottom side of the truck did you have any...
Yea that's why I asked I was hoping that some one used a specific product or new of any that I should avoid I think I am more than capable to do it my self I thought there product might be better...
Any one here know of any good do it yourself spray on Bed liner or should I just have it rhino lined but its 5-600 that just don't want to spend
a spray on or roll on is like a $100 just wondering...
That armor all product is basically the same thing you would need a lot of cans to do a crewcab pick up truck the kit comes with 7 gallons and the gun and some other stuff as well I think and they...
I was first thinking about doing it for a set of rims I had that I was thinking about putting on my truck the chrome was a little pitted so I was going to strip them and spray them black then I...
Anybody ever use this plastic dip stuff from dipyourcar.com or any other site is it easy to spray does it damage the paint under it any feed back would be great thanks
i buy cases of t8 bulbs all the time like 50pcs in a box for work and some times you may get a bulb or two that just dont work or light up a little or with some pink in it but if every bulb does it...
i have an 88 camaro with the stock 305 tbi need to get it running again so i can get some room to work on the 57 again a few years ago when the car was running i pulled a 350 that i put in another...
i had one of those hooked up to a cheap sears compresor and we almost flipped my freinds 91 firebird no poblem so you should have no problem with a small compresor you might not be able to pick up ...
well i just picked up a set of cts seats front and back all black leather from an 07 so i guess i am going to have to fab up some brackets that slide forward then lock back in place something like my...
i dont have the seats yet about to start the suspension trying to focus on that had my friends camaro in my garage taking up all the room now its out but i would have to come up with a bracket that...
i am pretty far off from doing my seats but i was going to run cts seats with the seat bealt biult into the seats i dont know if the eldorado is the same but would the bracket let you slide the seat...