There was oil in the compressor ,I think it may have been overfilled with gas and created too much pressure .The only difference I noticed is that the clutch turned on and of while the engine was...
Type: Posts; User: Bow tie downunder
There was oil in the compressor ,I think it may have been overfilled with gas and created too much pressure .The only difference I noticed is that the clutch turned on and of while the engine was...
Hi Lazlo
Update on air compressor .before pulling it apart I gave the compressor to a mobile air con guy .He took it away and said it was good ,couldn’t find anything wrong.I fitted it to the car...
My compressor does not have a brand name or identifying marks .When I ran it it cooled and worked fine for a while then started to cause the belt to squeal.I could pull it apart and have a look at...
Hi Laslo
I have a chrome, rear hose connection compressor that looks identical to the one on your car. My one was purchased in the US with pulleys and mount brackets ,.when it was gassed and...
12 CS 350 on the front
Thanks
The numbers on the spring are RHZ
1-6
Thanks
I’m considering coilovers .Could you recommend a spring rate and shocks .
Thanks
13356I’m measuring at the rear wheel well through the centre of the wheel. From the back of the car the right hand side is lower than the left. The right hand side is 92mm from the batwing to the...
Thanks for your help ,I only need to raise one side by 7/8
Thanks That’s how I see it.I had the rear end aligned professionally.[ATTACH]13354
Can you supply the dropped toe adjuster ,they are not on eBay .I had 50mm clearance but now It is 40 mm.
Thanks for the advice .Inreplaced the tyres on the rear with 265x45 18 which gave me an extra 1inch of clearance.The rear was too low with a 35 profile .The front is level.The measurement at the...
Sorry for the late reply and thanks for your help .The car is lower on one side about 1inch .13349
Thanks for your input .L have adjusted the front it’s the rear I’m not sure of.
This is what I have
Thanks for your help .I have raised the front on the coilovers which has made the car sit level.I don’t want to upset the geometry .I thought of using 20 inch wheels instead of 18 .
Is it possible to adjust the body height.I’m after 1/2 to 1 inch increase in height.
Thanks for you reply
The part is the same for tri five years
Hi I’m after a convertible US passanger side windshield corner trim piece
Thanks
Thanks
Hi I need some options for the conduit for the electric window wires .I have seen the 57 Chevrolet standard conduits .Has anyone used something different. I have been told that the holes should be...
I wasn't sure what to call it ,That's what Danchuck have them listed as.
The photo says it all Thanks
My favourite is the people I hang out with don’t worry about falling pregnant
Hi
If someone has a old cover in reasonable condition I would be interested in purchasing it .
I need to have a template . I would not use it
Mick