And not that it matters but on topic here is an example of console with big radius blending into valance glove box retained possible. Again I plug my effort to steer CN in same direction. ...
Type: Posts; User: rockytopper R.I.P 5-13-2017
And not that it matters but on topic here is an example of console with big radius blending into valance glove box retained possible. Again I plug my effort to steer CN in same direction. ...
LIKE LOL
See link post #7. I make my first attempt with crude photo chop of your design. You and Rick for some reason thought I was referring to the same bottom radius that Robert suggested and Rick said it...
Well your getting old my friend I even did a 3d model of it in your interior build thread. I told you to make the radius blend into the dash to match the instrument and or clock radius on the dash....
I tried to lead CN down that same path with his console but he didn't bite.....
Nice!!! I also like the wheels. If I was to be negative about anything why route the a/c hoses behind the fender you hide maybe 6 inches of hose vs routing it out the stock location.
Take a look at new Camaro or Charger before you buy. The torque thrust wheels are convex looking with the deep off sets require to fit. They loose a bit of there appeal IMO.
I used play dough before worked well.
Very Nice!!!
I have run the 500 box and their 4 wheel disc kit on my 65 olds for past 10 years got about 70k on both. Been real happy with them. But the bearings they supply are cheap junk I recommend you replace...
He actually offered to sale them during the build not sure what page it is a long one lol.
Joe Lutz from Hotrod dynamics was offering one. He built it during the nomad build. The sweet dark blue one for Dan.
Welcome aboard!!
What is your plan for the Battery location? That custom compartment looks like it would hold a plenty big tank. The sloped base should help with fuel slosh issues on hard take offs on low fuel.
I'm curious now what a taller ball joint might do when added to the C3 spindle. Not sure when it becomes to much. It would certainly increase the negative camber gain and allow for the lower arm to...
This hitch fits very well on a trifive see link. Just don't mess up like me and order 14308. It took heavy modification to fit lol.
http://www.curtmfg.com/part/13408
Rocky
I am not familiar with these but if they are anything close to what the second gen Camaro used you better weld the axle tubes or that will be your first failure on this rear end. For some reason the...
Congrats Bama.
Thanks Rick!! me too if I had not already invested in brakes.
Do you agree that it can be more or less a bolt in with the ball joint bushings using trifive ball joints? Do the tie rods match up with spindle?
This is a link to discussion from the other site started as a taller ball joint and why use them. Classic Gary added in the use of a C3 spindles and posted a picture comparing stock trifive spindle,...
RD will appreciate this. Same nomad as it looked when he purchased it a few weeks ago. Only added new tires and wheels and put lowering blocks in rear leafs in pictures above. I think this one might...
Run smaller tire wheel as noted or another brake that don't push wheels out or live with some rubbing you decide. Or huge offset wheels that look like this. All are ok.....
...
A prime example of chevelle disc with a 255/50/17 tire. One of the best looking nomads I've ever seen. Yes his tires rubbed lol. So did the 295/40/18 in back....
Great one. Sorry I missed ya this weekend. We were there Friday afternoon and very short time Satuday morning left at 10am.
Rocky