Cracked steering wheel should be around $50
Type: Posts; User: Bihili
Cracked steering wheel should be around $50
Using a air gun stapler helped me the most and the heat gun works good on small wrinkles. The rear corners just take a lot of time.
The type of steering you have will be the deciding factor.
As Chevynut said, include a relay and read up on logic ground wiring. It is a little confusing at first.
The stock base may not be a problem but the black plastic nut may be a problem because of its height.
http://www.trifivechevys.com/dbtgallery.php?do=view_image&id=232&gal=gallery
My local Tri-Five supplier says Auto City Glass is the only manufacturer of Tri-Five windshields in USA.
Danchuck and Eckler buy from Auto City.
I assume he is correct.
Currently Auto City Glass is the only manufacture in the USA.
Maybe the Seafoam is working.
My buddy had stop driving his 55 because the oil pressure kept dropping to zero upon acceleration. It has 40lbs at idle.
I bought this $22 endoscope inspection camera, drained his oil, plugged in...
Follow up:
Installed CPP 13 inch disc and their new caliper on the front. The rear twelve bolt drums were not changed.
Wow what a HUGE difference and now have good panic brake stopping. The other...
Vacuum pump works for me..
Ebay is the marketplace for finding the value of the 55.
I would watch Ebay for several weeks to get a feel of the marketplace.
For example:...
She doesn't drive it that much but the brakes are the reason why.
On a side note, my second 57 project (cruiser) is a cheaper build but has the 11 inch disc and hyrdoboost with the LS engine but it...
Update:
After installing a PSI gauge to the front caliper using the bleeder hole here are the stats.
With engine off my 125lb wife could only get 400 PSI.
I was barely able get 600 PSI with ...
I found a couple of PSI gauges. Now I need to figure out the adapters I need to connect to the front brake line at the caliper to test the pressure.
The first thing I want to test is disconnecting...
Duel 8 inch diaphragm with one inch bore master cylinder.
The vacuum pump kicks off at 18 inches of vacuum.
17 inch wheels on front would allow a 13 inch rotor.
I am not satisfied with the current 10 1/2 front disc and rear drums on 12 bolt rear end.
Because of the small supercharger I have an electric vacuum pump and additional tank which produces 18...
original paint &
S= survivor
http://www.landtreproductions.com/1955-1956-1957-chevy-emergency-brake-roller-new-sedan-hardtop-wagon-conv/
...
Many years ago one of the Hot Rod magazines did a comparison of one carburetor vs two carburetors.
I don't remember all the details but the bottom line was overall one carburetor out performed the...
I am not going to make any recommendations other than take some time to read this.
https://540ratblog.wordpress.com/2013/
Yes it is long but worth your time.
I did the same thing and I am amazed how often the detector goes off.
Even when I start the newer cars, if the garage door is closed the detector will go off.
So now I always open the garage door...
First thing I would check is the vacuum on your engine. Why???
If you are going to upgrade to a vacuum booster on power disc brakes you need at least 18 lbs. of vacuum for the booster to function...
Rescue Dog, does OSHAA approve the saw blade above the door?????:)
MIZ ZOU
welcome