Need some 57 hood measurements

[56-210Sedan]

Sorry my friend, i only have the hood.

[chevynut]

Sorry my friend, i only have the hood.

Well you could get measurement #3 for me if it's not too much trouble.

[56-210Sedan]

Well you could get measurement #3 for me if it's not too much trouble.

No trouble at all i measured from the corner of the hood (not the point) and got a measurement of 3" in the center of the rear bolt hole.

[chevynut]

Thanks Marty....not sure what you mean by "corner of the hood (not the point)". Can you explain? What is the "corner"?

I was looking for the measurement from the outside rear corners forward to the rear hinge bolt hole. So if you put a straightedge across the two corners and measure from the straightedge straight forward to the hole that's what I need.

Warren brought me a hinge today so I think I got the rest of the measurements I needed.

[56-210Sedan]

Laszlo, just on the inside of the hood ( underneath area) is a rolled corner i took a measurement from there because it follows the edge of the hood that goes along the cowl area.