Does anyone know where you can get a small tubes of this stuff? Was told this stuff is what is used for temp sensors ect...
Does anyone know where you can get a small tubes of this stuff? Was told this stuff is what is used for temp sensors ect...
I think Fastenal or Grangers would be good places to look.
Last edited by markm; 03-25-2013 at 11:44 AM.
Amazon.com, Sears.com, Granger have some of the large cans.
Last edited by Run-em; 03-25-2013 at 11:46 AM.
I think you can get graphite-based anti-sieze made by Permatex from Autozone or other auto parts stores. It shouldn't be that hard to find.
56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension
Other vehicles:
56 Chevy 2-door BelAir sedan
56 Chevy 210 4-door sedan
57 Chevy 210 4-door sedan
1962 327/340HP Corvette
1961 Willys CJ3B Jeep
2001 Porsche Boxster S
2003 Chevy Silverado 2500 HD Duramax
2019 GMC Sierra Denali Duramax
I use Permatex "Never Seize". You can get it from most any auto supply or industrial supply.
I don't think it has graphite, but it works for everything I use it for.
I prefer teflon tape or paste for pipe threads though. Just my preference, I think Never Seize will work for many applications using pipe thread.
A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly. Temperature range: -60°F to 1600°F (-51°C to 871°C). Salt, corrosion and moisture resistant – ideal for marine use. Non-aerosol version meets Mil Spec #907E. Aerosol - Level 3 *NFPA Fire Code 30B
http://www.permatex.com/products/pro...bricant-detail
56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension
Other vehicles:
56 Chevy 2-door BelAir sedan
56 Chevy 210 4-door sedan
57 Chevy 210 4-door sedan
1962 327/340HP Corvette
1961 Willys CJ3B Jeep
2001 Porsche Boxster S
2003 Chevy Silverado 2500 HD Duramax
2019 GMC Sierra Denali Duramax
Well there you go, it does have graphite.
I remember my boss from the old days when we were designing/building/retrofitting heavy equipment. We used it on a lot of mechanical joints. He could walk in the shop and 2 minutes later be covered in it, hands/face/shirt. Some of the mechanics could use it all day and never have to wipe their hands.
The Loctite Graphite 50 is what Jake from Classic Instruments suggested I use. Here is the problem; my gauge is showing about 20 degrees higher than the actual water temperature. The sender has the correct pipe size without having to use a bushing. CI sent me another sender to change out. I currently used regular anti sieze, but Jake said to use the 50, since it will have better electrical conductivity than the regular.
The electrical contact between the sender and block is not your issue if it's pipe thread.