-
firewall for a 55
Hi Guys, question, does any one make a firewall installation panel for the installation of a big block Chevy in a 55 or are we pretty much on our own for the modification? I am using an Earl Williams motor mount kit but leaving the motor in the stock location, also who makes a nice transmission crossmember that easily installed?Thanks Mike
-
Earle Williams has a couple of products you might be interested in looking at.
One is essentially a cover skin for cleaning up the firewall.
The other is some fitted pieces for improving clearance with a BBC. Works with his mounts.
The other option is a set back insert, several sell them.
-
Thanks Rick , I will check out Earls, do you have any names for the other manufactures that are making the set back insert? Thanks Mike
-
Registered Member
This is just an insert but they do many other things
Phone (828) 381-0391
email joelutz@hotroddynamics.com
Physical address:
HotRod Dynamics llc
1863 Norwood St SW
Lenoir, NC 28645
Mailing address:
Joe Lutz
1600 Lee Pearson Rd
Granite Falls, NC 28630
http://www.hotroddynamics.com/shop/v...php?groupid=20
-
Nick,
Thanks for the heads up. My mailing address is now the same as the physical Norwood address.
Anyway we have what you need. http://www.hotroddynamics.com/shop/v....php?groupid=0
These firewalls have been very popular and we have many customers using them with big blocks. Let me know if you need anything.
Thanks,
Joe
Last edited by joeelutz; 09-09-2013 at 05:16 PM.
-
this is a nice piece, I will have to look close at what I have now to see if the insert will be all that's needed or go for the show piece, Thanks Very much guys, Mike
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules