Got the firewall welded in today. Still have some work at the toe boards and the tranny hump. Steve wants me to rebuild the floor of the car that the other shop hacked.
20180405_003.JPG
Here's what I did on the left end of the brake shaft. In order to disassemble this without removing the whole brake brace, pedal, and shaft as a unit, I put a removable bushing on the left end. This way the bushing can be removed allowing the bracket to be removed, then the shaft can be pulled out. Otherwise the whole assembly would have to be installed and removed as a unit.
20180405_007.JPG
20180405_009.JPG
Next I have to do some filling and priming of the firewall and cowl, then install the brake assembly and booster/MC for the final time. Then I have to locate the Lokar gas pedal and mount it and finish the floor and tunnel. I guess I'll need to mount the brake pump too.