Does anyone have experience putting a Borla Eight stack EFI on a 502? I am running a R4 700 tranny and am having problems with the throttle body hookup. Had to fabricate the brackets for the wheel crank and still do not have the throttle body to WOT. Any suggestions would be welcome
Jeff
It doesn't seem to me that the engine size or type should matter. Don't they sell the right hardware to make the throttles work properly? What gas pedal linkage are you using? Any pics?
Welcome to the site!
56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension
Other vehicles:
56 Chevy 2-door BelAir sedan
56 Chevy 210 4-door sedan
57 Chevy 210 4-door sedan
1962 327/340HP Corvette
1961 Willys CJ3B Jeep
2001 Porsche Boxster S
2003 Chevy Silverado 2500 HD Duramax
2019 GMC Sierra Denali Duramax
They do not have the linkage. Brackets for the wheel crank need to be fabbed. Thermoregulator on front of block had to be adapted to fit Still working on the throttle body setup Pictures to follow. Thanks for the reply
I don't know if you have the room, but I used a Weiand 4022 kit.
jm494.jpg
1955 2D HT, 1957 2D Sedan, 2004 Z06 Corvette, http://s1070.photobucket.com/user/OL...?sort=3&page=0
Welcome to the site George, look forward to the pics.
Reply With Quote
