tire size

[JT56]

You don't have a stock rear axle, do you? Do you know the axle width and the wheel offset?

When I first put the drag radials on. I had a stock 56 rear end(60" face to face) with leafs in the stock location. I cant remember if they are 4 1/4 or 4 1/2? Been awhile. Now my 9" is 58.5" from rotor face to face. I am having to use 1/2 wheel spacers to center them. Once the mini tub is done then I will order new wheels.

[567chevys]

A 275 tire on a wheel with the correct backspacing will barely fit, there is no room for error.

Chevynut did a spreadsheet years ago on wheel and tire fit and clearance. It is still on the internet somewhere.

Its on this site up at the top on the Tool Bar under Calculators

[567chevys]

A 275 tire on a wheel with the correct backspacing will barely fit, there is no room for error.

Chevynut did a spreadsheet years ago on wheel and tire fit and clearance. It is still on the internet somewhere.

Its on this site up at the top on the Tool Bar under Calculators

Sid

[Rick_L]

I didn't know it was so close at hand. Good job, Sid.