Looking sharp Laszlo!
Looking sharp Laszlo!
Looks great, makes all the hard work worthwhile when it all comes together!!
Looks very nice.
All I can say is
WOW
Really Nice Job !
Sid
1955 2 DR Post
1937 Chevy Coupe
2023 Ford Super Duty F350 TREMOR
2019 Corvette Z06
1955 Chevy Nomad
1935 Ford 2dr Slant back I have 4
That's so pretty, I wouldn't want to cover it up with a body... ... just put it under glass and display it!
That is really gorgeous! I have been following your build on multiple sites, and for a number of years. Everything is top notch, and most inventive hot rodding! Can't wait to see it complete - will be, and is, most excellent!
Thanks guys! Got a little more done today. I installed the fuel lines and part of the serpentine accessory drive. Got distracted and didn't have time to install the upper intake permanently.
20170207_007.JPG
20170207_008.JPG
Here's the issue I mentioned. I didn't see this before but at full extension the head of the bolt on the rear swaybar link comes really close to hitting the batwing mount. I'm going to extend the top of the link by 1/2" and that will take care of the problem and the fact that the bolt holes are a little oversize anyhow since they were made for a 10mm bolt and I'm using 3/8".
20170207_004.JPG
20170207_006.JPG
20170207_005.JPG
Here's that peeling chrome on the A/C bracket. It's underneath and really wouldn't show, but I can't put it on like that. Still looking for someone to re-chrome it.
20170206_003.JPG
Last edited by chevynut; 02-07-2017 at 03:18 PM.
56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension
Other vehicles:
56 Chevy 2-door BelAir sedan
56 Chevy 210 4-door sedan
57 Chevy 210 4-door sedan
1962 327/340HP Corvette
1961 Willys CJ3B Jeep
2001 Porsche Boxster S
2003 Chevy Silverado 2500 HD Duramax
2019 GMC Sierra Denali Duramax
Chrome - who have you contacted? There is a small shop in the DFW area that does nice work. I can't recall the name but I can get it from Geoff if you run out of places.