Just joined? Please introduce yourself.
Classic Edge Designs, LLC Prime Custom Cars, LLC MadMooks
Page 8 of 8 FirstFirst ... 678
Results 71 to 80 of 80

Thread: 1947 Biederman Truck Fender Repairs

  1. #71
    Registered Member MP&C's Avatar
    Join Date
    Dec 2013

    Member #:2017
    Location
    Southern MD
    Posts
    1,015
    John stopped by the shop last night so we could fit up the running board skirts on the Biederman.





    I know he will be glad to close off this gaping hole.





    After taking some measurements we got the top flange folded over using the magnetic brake. The flange will be bolted to the underside of the cab to support the weight as we will leave about a 1/4" or so gap above the running board to allow for frame flex.











    Rivet Nuts installed under the cab...








    The rubber edge trim is our attempt to keep the paint from rubbing off, and these are held in place using weatherstrip adhesive.





    The dump bed had been painted over when John bought it, but closer inspection showed where some additional layers of paint in the hand painted lettering, "Phone 60" had staved off surface rust in it's previous life and was still visible...

    Robert



    MP&C Shop Projects-Metalshaping Tutorials


    Instagram @ mccartney_paint_and_custom


    .

  2. #72
    Registered Member MP&C's Avatar
    Join Date
    Dec 2013

    Member #:2017
    Location
    Southern MD
    Posts
    1,015
    To finish off the running board skirts, some epoxy primer was brushed into the hem fold, given a couple days to cure, and then seam sealer added to keep out the moisture..







    ….then another dose of epoxy over the seam sealer, and everything primed.







    I didn't get pictures of spraying the blue, so the finals will have to do. John is tying up the loose ends, the running board skirts were installed the other night.....







    The dump body has been painted and he should get that installed today or tomorrow.





    He will get it loaded up around Wednesday for the trip to Macungie PA for the truck show this coming weekend.
    Robert



    MP&C Shop Projects-Metalshaping Tutorials


    Instagram @ mccartney_paint_and_custom


    .

  3. #73
    Moderator NickP's Avatar
    Join Date
    Mar 2012

    Member #:1653
    Location
    De Queen, AR
    Posts
    3,990
    that's purty

  4. #74
    Registered Member
    Join Date
    May 2012

    Member #:625
    Posts
    2,295
    No 1946 dump truck ever looked so good.

  5. #75
    Registered Member MP&C's Avatar
    Join Date
    Dec 2013

    Member #:2017
    Location
    Southern MD
    Posts
    1,015
    Thanks for the comments guys.

    John has the Biederman loaded up and is headed up to Macungie PA today for the truck show this weekend.



    This is the "tow" vehicle with Ian Watson, who is visiting from Melbourne Australia.



    Anyone going to the Macungie show this weekend, stop by and check out the Biederman, a pretty rare truck..
    Robert



    MP&C Shop Projects-Metalshaping Tutorials


    Instagram @ mccartney_paint_and_custom


    .

  6. #76
    Registered Member
    Join Date
    Jun 2015

    Member #:2579
    Posts
    107
    Is it a 1946 model ?

  7. #77
    Registered Member chevynut's Avatar
    Join Date
    Nov 2011

    Member #:115
    Location
    Fort Collins, CO
    Posts
    9,935
    Quote Originally Posted by Rustaddict View Post
    Is it a 1946 model ?
    Thread: 1947 Biederman Truck Fender Repairs

    56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension

    You can see my 56 Nomad build here http://www.picturetrail.com/chevynut

    For affordable C4 Corvette Suspension conversions for your car, visit http://www.classicedgedesigns.com

    Other vehicles:

    56 Chevy 2-door BelAir sedan
    56 Chevy 210 4-door sedan
    57 Chevy 210 4-door sedan
    1961 Willys CJ3B Jeep
    2001 Porsche Boxster S
    2003 Chevy Silverado 2500 HD Duramax

  8. #78
    Registered Member MP&C's Avatar
    Join Date
    Dec 2013

    Member #:2017
    Location
    Southern MD
    Posts
    1,015
    Some pics from the Macungie show, photo credit Pat66, Stovebolter



    Robert



    MP&C Shop Projects-Metalshaping Tutorials


    Instagram @ mccartney_paint_and_custom


    .

  9. #79
    Registered Member
    Join Date
    May 2012

    Member #:625
    Posts
    2,295
    Quote Originally Posted by MP&C View Post
    Some pics from the Macungie show, photo credit Pat66, Stovebolter



    The truck pulling is as cool as one being towed.

  10. #80
    Administrator 567chevys's Avatar
    Join Date
    Oct 2010

    Member #:3
    Location
    Kelso,Washington
    Posts
    2,031
    Sweet Ass Truck, Great Job Robert & Crew



    Sid

    1955 2 DR Post
    1937 Chevy Coupe
    2019 Ford Suoer Duty F350
    2018 Ford Explorer
    1955 Chevy Nomad
    1934 Plymouth PE Coupe

Page 8 of 8 FirstFirst ... 678

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •