-
Registered Member
How to finish Bed Wood for '57 3100
Bought new wood for my '57 build. Chose pine. Oak was on it. Tried to restore but was disappointed in the results.
I don't see anything on this topic.
I want to "stain" this wood "natural". Light stain.
Would really appreciate advice on what I should use for the finish and sealing it. I've found that Sikkens stain is great for my log house. Cover with simple polyurethane? Total Wood Protection (TWP) any good.
Your ideas / experiences welcome.
Thanks in advance.
-
Call Kindigit and ask what they used in the 1950 Fleet Side. 801.262.3098
-
Registered Member
The problem you are going to have with any polyurethane is lack of UV protection. I am refinishing a dash on my 34 Ford and I am using a two step process, first fill with epoxy and then top coat with 2K clear coat for the UV protection.
https://www.amazon.com/TotalBoat-5-1.../dp/B00HR8518Y. I used two coats of epoxy to fill the grain and then plan on spraying clear coat over the top.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules