Quote Originally Posted by chevynut View Post
No Scorp, I wired it from scratch. That bundle of wires coming down from the dash into the left side of the console has 80 wires, and there's about 30 on the other side, mostly the Holley engine harness that I modified. There's no manufactured harness out there that would have worked on this car...not even close.

Here's a list of the power items/accessories I have installed.

Twin Derale fans with Dakota Digital PAC-2750 fan controller
Autoloc electric hood release solenoid (custom mount)
Electric power brakes
Power windows with one-touch controllers
Power vent windows
Holley C950 ECM with Wideband O2
Power antenna
Dakota Digital VHX gauges and clock
Dakota Digital PAC-3500 door lock controller with Electric-Life door locks
Dakota Digital PAC-1300 automatic headlight/dome/RAP controller
12-way 2000 Cadillac Eldorado power seats
Raingear wipers with delay switch
Kenwood DDX-471HD 2-DIN touchscreen stereo
Polk Audio speakers
Rockford Fosgate amp
Dakota Digital cruise control
Boyo backup camera
Danchuk 56 backup light kit
DMH 3 1/2" electric cutouts with one-touch controller
Walbro 255LPH fuel pump
Centex Auto Dimming mirror with temp and compass
Vintage Air Gen IV Sure Fit A/C
Panther keyless entry/Alarm system
Hella dual note horns
Multiple LED courtesy lights, console box light
Console fan (cooling for amp and ECM)

Also plan to add all LED exterior lights and headlights. I have a whole binder full of schematics with the wire sizes and colors and a drawing of the fuse panel with all the fuses marked. Relay sockets are labeled and also shown on the schematics. Hope I don't need them.
I know you did. Just poking at you

It looks good but oh my thats some wire. I can just see the service guys face at the repair shop when you tell him that you have a wiring issue in your console and can he take a look.

Scorp