Just joined? Please introduce yourself.
Classic Edge Designs, LLC Prime Custom Cars, LLC MadMooks
Results 1 to 3 of 3

Thread: Dual Quad Question

  1. #1
    Registered Member
    Join Date
    Jul 2017

    Member #:3477
    Location
    Mount Airy, MD
    Posts
    5

    Dual Quad Question

    Hi guys:

    I have a question. I am building a 283 for my '55 2-door wagon. I will be running an edelbrock 2-four intake. My question is to break in. I don't want to fiddle with setting up the carbs when I initially fire the motor and run it to break in. Can I close off one of the carb openings with a steel plate and break the motor in off of just one carb? Then once broken in, set up the dual quad intake?

    The alternative is to fire it up with a single 4 intake, break it in and then switch intakes on the car. Thats a bit of a nuisance. Try-Five friend says close off the openings and use 2 four manifold, Machine Shop says switch intakes.

    Thoughts guys?

    thanks!

    Scorp
    Scorpion1110
    Hard to Kill

    Rides:
    1957 Thunderbird
    1955 Chevy 2-door Wagon
    1970 Honda Trail 70

    Also looking for a Sony TTS3000 turntable

  2. #2
    Registered Member
    Join Date
    Apr 2012

    Member #:571
    Posts
    3,083
    No need to block off one of the carb mounting flanges. Just don't hook up the linkage to one of them.

  3. #3
    Registered Member WagonCrazy's Avatar
    Join Date
    Mar 2012

    Member #:530
    Location
    Santa Clarita, CA
    Posts
    767
    I have no experience with a dual carb setup, so I'm asking a newbie kind of theory/question here:
    Running 1 carb (on a manifold designed for 2 with the other one capped off) means the fuel source is closer to either the front 4 cylinders, or the back 4 cylinders.
    Does that affect equal distribution of fuel as each intake valve sucks the air/fuel mixture in? And does that unequal distribution mean one set of the 4 cylinders runs a bit leaner than the other 4 because its farther away?
    And would that screw things up when breaking in an engine?
    Just thinking it through without having any practical experience here...
    Would hate to see you blow your engine up due to lean situation on some cylinders.
    Common sense tells me to switch to the single carb manifold for the break in period, because it's sitting dead center over the middle of the engine...so maybe air/fuel distribution is more equal to all cylinders?

    Call me right or wrong here guys...who's got the answers?
    1957 Nomad- LS1/T56 on C4 chassis- [URL=http://s78.photobucket.com/user/pcardey/library/57%20Chevy%20Nomad%20wagon[/URL]

    1959 Fleetside Apache 1/2 ton, shortbed, big window- [URL=http://s78.photobucket.com/user/pcardey/library/59%20Apached%20Fleetside%20Big%20Window%20Shortbed[/URL]

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •