Just joined? Please introduce yourself.
Results 1 to 4 of 4

Thread: wheel backspacing

  1. #1
    Registered Member
    Join Date
    Nov 2015

    Member #:2764
    Posts
    649

    wheel backspacing

    I always seem to mix this up so I'll look dumb and ask.
    My current 8" wide wheels have a 3.75" backspacing and could go out toward the fender 1/2" to be centered.
    So I want to get 2 wheels for slicks, should I try to find 8" ones with 4.25" backspacing?

  2. #2
    Registered Member chevynut's Avatar
    Join Date
    Nov 2011

    Member #:115
    Location
    Fort Collins, CO
    Posts
    10,835
    To go further toward the fenderwell (quarter panel) you would want LESS backspacing, not more. Backspacing is measured from the backside of the wheel flange to the wheel mounting surface. So to move the wheel center outboard, you would want less backspacing.

    Lots of guys get wheel backspacing and offset messed up. That's why I prefer to talk about offset, and not backspacing. Here's the catch....an 8" wheel's center is NOT at 4" from the wheel outside edges. An 8" wheel is actually about 9" wide outside the wheel flanges because the 8" is measured where the bead seats. So the center of an 8" wheel is at 4.5" backspacing, or ZERO offset. The center of any wheel is at zero offset. Your current wheels have 3.75" backspacing which is -3/4" offset. It's negative because the mounting surface is INBOARD of the center. A 4.25" backspace wheel would have -.25" offset. Positive offset is when the mounting surface is outboard of the wheel center. Some wheels are only sold with offset specified, and not backspacing, so it's important to understand this.
    56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension


    Other vehicles:

    56 Chevy 2-door BelAir sedan
    56 Chevy 210 4-door sedan
    57 Chevy 210 4-door sedan
    1962 327/340HP Corvette
    1961 Willys CJ3B Jeep
    2001 Porsche Boxster S
    2003 Chevy Silverado 2500 HD Duramax
    2019 GMC Sierra Denali Duramax

  3. #3
    Registered Member BamaNomad's Avatar
    Join Date
    Nov 2016

    Member #:3217
    Location
    Rocket City, USA (Huntsville, AL area)
    Posts
    3,774
    Nice explanation CN...

  4. #4
    Registered Member
    Join Date
    Nov 2015

    Member #:2764
    Posts
    649
    Thanks, I got it. For now anyway.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •