Spent a couple hours this morning chasing body mount holes around trying to get them all lined up to take a bolt. You get 2 holes lined up, then 6 are off! Finally after a lot of shifting the body a little at a time in multiple directions, I finally got all the bolts in, and snugged down. I think only 1 bolt is in the center of the hole, and the rest are scattered one way or the other. Had to use 8 shims all together to get some load on all of the bushings before tightening down. Now I can continue with the next step of fabricating the front mount from the firewall to the frame.
IMG_3521.JPGIMG_3522.JPG