wiring up the 57 nomad. have power bucket seats out of a lexus .
the fuse panel is mounted to the center trans tunnel, just ahead of the T56 shifter.
is there any reason why i need to wire in a relay to power the seats?
its less than a 3 foot wire run from fuse panel to each seat motor.
can i just wire them both to thru a fuse in the panel and call it a day?

would be wired to 'always hot 12v" so they can be operated with the engine off...

hmmm, i wonder if the electronics under each seat already have relays there? gonna have to check that.

if not, thinking of wiring directly to a 30 amp fuse ...no relay.

problems?