Thanks CN, no I don’t have any pictures. I just cut the fiberglass, beveled the edges, made a sheet metal piece for the shift area extension, overlapped it under the glass, and pop riveted/ glued it onto the console halves. Then Gary glassed over the metal, I sanded it down, filled it, and sanded the filler down. For the shortened section, I did it the same way, except just butted up the beveled edges. To finish it off, the whole console was epoxy sealed and shot with semi-gloss black.
The console will be covered in the same leather as the seats. In addition, the interior shop has made some false trans tunnel sides for trifives that go partially up the console. These are carpeted and reduce the apparent depth of the console. I’ve seen pictures and like the result.