Just joined? Please introduce yourself.
Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 42

Thread: Greg and 1955 chevy 2 door

  1. #11
    Banned
    Join Date
    Mar 2016

    Member #:2941
    Location
    Galt's Gulch
    Posts
    2,419
    Welcome aboard, Greg! You have quite a job there. Wish you all the best and will follow your build with interest.

    Best regards,

    Harry

  2. #12
    Registered Member
    Join Date
    Mar 2018

    Member #:3732
    Posts
    42

    Harry

    Thanks it is good to hear from you. I know I have a huge job ahead of me but I am doing all that I can myself to try and save this car. I am saving to buy a large compressor and then I plan to buy some metal some 4X4 posts and 2 chain falls to raise the body up ( or what is left of it ) to get the frame sandblasted. Paint it attach my new floor board to it and then put it back under the body. I have a lot to do but if I stay after it a few hours a day it will be done in the 4 year goal that I have. take care and G-D bless

  3. #13
    Registered Member
    Join Date
    Mar 2018

    Member #:3732
    Posts
    42

    some sanding

    Did some hammer and dolly on the deck lid and DA'd it. Now ready to do some Rage.
    Attached Images Attached Images

  4. #14
    Registered Member chevynut's Avatar
    Join Date
    Nov 2011

    Member #:115
    Location
    Fort Collins, CO
    Posts
    10,835
    Rage ON!
    56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension


    Other vehicles:

    56 Chevy 2-door BelAir sedan
    56 Chevy 210 4-door sedan
    57 Chevy 210 4-door sedan
    1962 327/340HP Corvette
    1961 Willys CJ3B Jeep
    2001 Porsche Boxster S
    2003 Chevy Silverado 2500 HD Duramax
    2019 GMC Sierra Denali Duramax

  5. #15
    Registered Member
    Join Date
    Jun 2016

    Member #:3018
    Posts
    157
    Welcome... Glad to see I'm not the only one with a rusty pile that needs a lot of attention around here . Looks like you're already making some great progress though.... I set a 5 year goal to build a driver, and I know I've already missed that boat... Keep up the good work

  6. #16
    Registered Member
    Join Date
    Mar 2018

    Member #:3732
    Posts
    42
    Got some work done today on the chevy.
    Attached Images Attached Images
    Last edited by 55chevysedanX4; 03-01-2019 at 09:59 PM. Reason: Did not think pics posted.

  7. #17
    Registered Member BamaNomad's Avatar
    Join Date
    Nov 2016

    Member #:3217
    Location
    Rocket City, USA (Huntsville, AL area)
    Posts
    3,774
    Observable progress! That is what gets it done...

  8. #18
    Registered Member
    Join Date
    Mar 2018

    Member #:3732
    Posts
    42
    did some welding today I still need to fill some pin holes and do some hammer and dolly work. 20190303_211611.jpg20190301_220232.jpg

  9. #19
    Registered Member
    Join Date
    Mar 2018

    Member #:3732
    Posts
    42
    I got the shifter back from the rebuilder. It cost me 200.00 to get it rebuilt but I only paid $75.00 for it to begin with. It was missing a couple of parts so I am glad I did it. 20190315_213815.jpg

  10. #20
    Registered Member
    Join Date
    Mar 2018

    Member #:3732
    Posts
    42
    Got this in the mail yesterday and it should make my life a whole lot easier.20190323_061633.jpg

Page 2 of 5 FirstFirst 1234 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •