Just joined? Please introduce yourself.
Classic Edge Designs, LLC Prime Custom Cars, LLC MadMooks
Results 1 to 4 of 4

Thread: 1956 chevy clip for 3 speed trans swivel lever on frame question

  1. #1
    Registered Member
    Join Date
    Sep 2016

    Member #:3126
    Posts
    28

    1956 chevy clip for 3 speed trans swivel lever on frame question

    Hello again.I am attempting to install this small silver bent clip over the lever that goes on the frame.I installed the new {2| bushings and can't figure from the pics whether the clip goes bent side out or in and the way to install it.I don't want to ruin it because it is the only one I have.This is the 2 lever swivel that the linkage hooks to.Thanks again.

  2. #2
    Registered Member BamaNomad's Avatar
    Join Date
    Nov 2016

    Member #:3217
    Location
    Rocket City, USA (Huntsville, AL area)
    Posts
    942
    I'd be surprised if it will go on other than the way it was designed...?

  3. #3
    Registered Member
    Join Date
    Sep 2016

    Member #:3126
    Posts
    28
    Yes,thats the problem,I do not know how it was designed to go on.Anyone with pics?Thanks

  4. #4
    Registered Member BamaNomad's Avatar
    Join Date
    Nov 2016

    Member #:3217
    Location
    Rocket City, USA (Huntsville, AL area)
    Posts
    942
    Is this the bracket/clip you are speaking of?

    https://www.trifive.com/forums/attac...3&d=1274134115

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •