Just joined? Please introduce yourself.
Classic Edge Designs, LLC Prime Custom Cars, LLC MadMooks
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: plasma cutters

  1. #11
    Registered Member
    Join Date
    Mar 2017

    Member #:3360
    Location
    Canton,Ohio
    Posts
    67
    56 I looked at the Specs. a lot closer and thanks for pointing them out. It seems that all the sites sale the 45xp for the same price. The duty cycle and KW output is the best on the 45. Know I need to decide between 20' or 50' torch. I'll let you guy's know what I decide?

  2. #12
    Registered Member chevynut's Avatar
    Join Date
    Nov 2011

    Member #:115
    Location
    Fort Collins, CO
    Posts
    9,342
    Quote Originally Posted by bigblock View Post
    Know I need to decide between 20' or 50' torch.
    I can't imagine what you would need a 50' torch for. I think 20-25' is plenty. These things are fairly easy to carry around and I wouldn't want to deal with 50 feet of hose. But it all depends on your shop setup. One thing to consider is whether you want to use 110V or 22V. My Miller 375 allows you to use both and I use it on 110V 99% of the time. Same with my Miller 211 MIG, you change the adapter on the end to use 110V. You may not always have 220V available where you want to use it.
    56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension

    You can see my 56 Nomad build here http://www.picturetrail.com/chevynut

    For affordable C4 Corvette Suspension conversions for your car, visit http://www.classicedgedesigns.com

    Other vehicles:

    56 Chevy 2-door BelAir sedan
    56 Chevy 210 4-door sedan
    57 Chevy 210 4-door sedan
    1961 Willys CJ3B Jeep
    2001 Porsche Boxster S
    2003 Chevy Silverado 2500 HD Duramax

  3. #13
    Registered Member
    Join Date
    Mar 2017

    Member #:3360
    Location
    Canton,Ohio
    Posts
    67
    CN that's way I thru that in there to get a reply from guy's that use them a lot. Thanks.

  4. #14
    Registered Member
    Join Date
    Jun 2016

    Member #:3018
    Posts
    87
    Quote Originally Posted by chevynut View Post
    I can't imagine what you would need a 50' torch for. I think 20-25' is plenty. These things are fairly easy to carry around and I wouldn't want to deal with 50 feet of hose. But it all depends on your shop setup. One thing to consider is whether you want to use 110V or 22V. My Miller 375 allows you to use both and I use it on 110V 99% of the time. Same with my Miller 211 MIG, you change the adapter on the end to use 110V. You may not always have 220V available where you want to use it.
    Exactly what he said... Dual voltage is nice too, according to the chart both the miller and the victor cut master are both dual voltage.

Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •