-
Registered Member
-
What you have appears to be a McGaughy spindle. It uses "metric" calipers and rotors.
The booster appears to be an aftermarket dual diaphragm booster, probably 8" but not sure.
-
If I remember my days in the junk business correctly there are 3 G body metric rotors 78, 79-80 and 81-88.
-
Could be, but I've always seen 79-82 or 79-84 as the ones to use with the McGaughy and Heidts spindles (as well as some others). At some point as the years advanced they used metric lug studs. The same might have happened with the calipers - use of metric threads on the banjo bolt and even the pins. You can make any of this work, you just have to realize what your fasteners and other threads are.
-
Registered Member
Thanks Guy's I thought that's what they were, I remember my mom's 78 Monte Carlo and they look very familiar.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules