Just joined? Please introduce yourself.
Classic Edge Designs, LLC Prime Custom Cars, LLC MadMooks
Results 1 to 8 of 8

Thread: driver & Passanger Upper Door Glass Seals

  1. #1
    Registered Member BCPrez's Avatar
    Join Date
    Aug 2018

    Member #:3898
    Location
    Cave Junction, OR
    Posts
    22

    driver & Passanger Upper Door Glass Seals

    Anyone replace the upper door glass seals? I'm looking to replace mine as the drivers side doesn't fit correctly. The radius corner is puckered on my existing seals and allows to much air to leak. Anyone have any recommendations on where to buy replacement seals?

    Thanks,

  2. #2
    Registered Member chevynut's Avatar
    Join Date
    Nov 2011

    Member #:115
    Location
    Fort Collins, CO
    Posts
    9,445
    Are you talking about the roof rail weatherstrips? I haven't seen any designed like the originals with the rubber flap on them to seal against the window frame. I have a pair from Danchuk that are molded curved to fit the roof. I've seen some that are straight and you have to bend them to fit. Not sure why it's so hard to make them like the originals were designed. I'm going to SEMA in a few weeks and I'm hoping SoffSeal is there so I can take a look at some of theirs. I also need some door weatherstrips.
    56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension

    You can see my 56 Nomad build here http://www.picturetrail.com/chevynut

    For affordable C4 Corvette Suspension conversions for your car, visit http://www.classicedgedesigns.com

    Other vehicles:

    56 Chevy 2-door BelAir sedan
    56 Chevy 210 4-door sedan
    57 Chevy 210 4-door sedan
    1961 Willys CJ3B Jeep
    2001 Porsche Boxster S
    2003 Chevy Silverado 2500 HD Duramax

  3. #3
    Registered Member chevynut's Avatar
    Join Date
    Nov 2011

    Member #:115
    Location
    Fort Collins, CO
    Posts
    9,445
    Looks like the Soffseal ones are straight and the Danchuk ones are curved. I don't know if anyone else makes them but I don't think so.

    https://www.soffseal.com/parts/1956-...of-rail-seals/



    https://www.danchuk.com/ItemForm.aspx?Item=296

    56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension

    You can see my 56 Nomad build here http://www.picturetrail.com/chevynut

    For affordable C4 Corvette Suspension conversions for your car, visit http://www.classicedgedesigns.com

    Other vehicles:

    56 Chevy 2-door BelAir sedan
    56 Chevy 210 4-door sedan
    57 Chevy 210 4-door sedan
    1961 Willys CJ3B Jeep
    2001 Porsche Boxster S
    2003 Chevy Silverado 2500 HD Duramax

  4. #4
    Registered Member BCPrez's Avatar
    Join Date
    Aug 2018

    Member #:3898
    Location
    Cave Junction, OR
    Posts
    22
    I think the ones I have on mine must be the Soffseal type because as much as they are puckered they couldn't have been molded to the curve.

    What days are you going to SEMA? I will be there as well Tuesday, Wednesday & Thursday.

    Thanks for info.

  5. #5
    Registered Member chevynut's Avatar
    Join Date
    Nov 2011

    Member #:115
    Location
    Fort Collins, CO
    Posts
    9,445
    Quote Originally Posted by BCPrez View Post
    What days are you going to SEMA? I will be there as well Tuesday, Wednesday & Thursday.
    We arrive in Vegas on Monday and have stuff to do Tuesday morning so we may not make it to SEMA until Wednesday morning. We leave on Saturday.
    56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension

    You can see my 56 Nomad build here http://www.picturetrail.com/chevynut

    For affordable C4 Corvette Suspension conversions for your car, visit http://www.classicedgedesigns.com

    Other vehicles:

    56 Chevy 2-door BelAir sedan
    56 Chevy 210 4-door sedan
    57 Chevy 210 4-door sedan
    1961 Willys CJ3B Jeep
    2001 Porsche Boxster S
    2003 Chevy Silverado 2500 HD Duramax

  6. #6
    Registered Member BCPrez's Avatar
    Join Date
    Aug 2018

    Member #:3898
    Location
    Cave Junction, OR
    Posts
    22
    Hope you have a safe & fruitful trip. I know it's a very busy trip for us as well and there is so much to see and check out.

  7. #7
    Registered Member chevynut's Avatar
    Join Date
    Nov 2011

    Member #:115
    Location
    Fort Collins, CO
    Posts
    9,445
    Let me know if you'd like to get together for a beer or something one of the days you're there. Would love to meet up to at least say hi. My phone number is on my website.
    56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension

    You can see my 56 Nomad build here http://www.picturetrail.com/chevynut

    For affordable C4 Corvette Suspension conversions for your car, visit http://www.classicedgedesigns.com

    Other vehicles:

    56 Chevy 2-door BelAir sedan
    56 Chevy 210 4-door sedan
    57 Chevy 210 4-door sedan
    1961 Willys CJ3B Jeep
    2001 Porsche Boxster S
    2003 Chevy Silverado 2500 HD Duramax

  8. #8
    Registered Member BCPrez's Avatar
    Join Date
    Aug 2018

    Member #:3898
    Location
    Cave Junction, OR
    Posts
    22
    Yes it would be great to meet you. I will put your number in my phone and we'll see if we can find time that works with everyone.

    Thanks,

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •