Just joined? Please introduce yourself.
Classic Edge Designs, LLC Prime Custom Cars, LLC MadMooks
Results 1 to 3 of 3

Thread: Deleting Nomad Door Vent Window

  1. #1
    Registered Member
    Join Date
    Apr 2012

    Member #:610
    Location
    Earth
    Posts
    30

    Deleting Nomad Door Vent Window

    I am attempting to convert my 1957 Nomad doors to one solid window and deleting the vent window. I purchased an extra set of verticle door stainless so I can retain my originals in case I ever want to put back the original vent windows. I have purchased reproduction Nomad doors and No-Vent Power Window Regulators as well as duplicates of other parts needed, but, I am curious as to what others have done in modifying the stainless where the top cap goes.

    Just some info, on my Nomad, I know that the top caps are specific to driver and passenger sides (my Nomad's top vent caps are not the "shorts") and that my 57 Nomad was built in New York (according to the vin). purchased the vertical door trim pieces (inners) that have extra material at the top so I have some metal to play with in figuring out how I will go about this. My Nomad's original vertical inners and do not have this bend at the top for the "shorts" to slip into.

    Any insight is appreciated for my 57 Nomad.

    Thanks

  2. #2
    Registered Member chevynut's Avatar
    Join Date
    Nov 2011

    Member #:115
    Location
    Fort Collins, CO
    Posts
    9,445
    I know this is pretty easy to do on a sedan without a chrome window frame and I know it's been done on Nomads but I can't say I've ever seen it done on a hardtop. However, I don't know how they've dealt with the issue of removal of the vent window cap and finishing the top of the vertical stainless. You would have to add some length to the chrome window frame to make it work and put the felt channel on the front of the door instead of the back of the vent window channel. Seems like it's going to take some custom fabrication to do it but it can be done. Just dive in and do it.





    The owner of this 55, Ron Pfisterer, posts on Facebook all the time, you might want to contact him for info:

    http://www.generationhighoutput.com/...-nomad-sunmad/

    56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension

    You can see my 56 Nomad build here http://www.picturetrail.com/chevynut

    For affordable C4 Corvette Suspension conversions for your car, visit http://www.classicedgedesigns.com

    Other vehicles:

    56 Chevy 2-door BelAir sedan
    56 Chevy 210 4-door sedan
    57 Chevy 210 4-door sedan
    1961 Willys CJ3B Jeep
    2001 Porsche Boxster S
    2003 Chevy Silverado 2500 HD Duramax

  3. #3
    Registered Member
    Join Date
    Apr 2012

    Member #:610
    Location
    Earth
    Posts
    30
    Does anyone know what stainless I need to use to match up with the stock stainless in terms of color and composition so that I can modify the second set of stainless I have for the one piece door window. Does anyone one know what stainless was used on trifives?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •