Just joined? Please introduce yourself.
Classic Edge Designs, LLC Prime Custom Cars, LLC MadMooks
Results 1 to 2 of 2

Thread: 1957 2 dr. sedan door jamb patch panel

  1. #1
    Registered Member
    Join Date
    Nov 2017

    Member #:3581
    Posts
    1

    1957 2 dr. sedan door jamb patch panel

    Need a piece of the door jamb off a '57 2 dr. Maybe one of you guys has a body that's been cut up. Need a piece about 10" tall. About 2" below the belt line trim and about 7" up from the bottom. 6" from the jamb back towards the wheel well and across the face of the jamb. Only need the outside skin. Check out the picture to see what I need. Have a question, is this piece the same on a '55 through '57? Thanks. Joe.

    This one resized.jpg

  2. #2
    Registered Member chevynut's Avatar
    Join Date
    Nov 2011

    Member #:115
    Location
    Fort Collins, CO
    Posts
    9,504
    Welcome to the site. That part should be the same for all 2-door sedans, 55-57. Pretty sure wagons have a different jamb and I know Nomads do. Looks to me like you could replace just the outer 2" or so by cutting it at the bend. That's what I'd do. I actually have a full 2-door jamb but it's for my sedan that has damage in the same place as yours .

    I had to repair the one on my Nomad too.

    20070528_704.JPG

    20070528_709.JPG

    20171107_002.JPG
    Last edited by chevynut; 11-04-2018 at 11:10 AM.
    56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension

    You can see my 56 Nomad build here http://www.picturetrail.com/chevynut

    For affordable C4 Corvette Suspension conversions for your car, visit http://www.classicedgedesigns.com

    Other vehicles:

    56 Chevy 2-door BelAir sedan
    56 Chevy 210 4-door sedan
    57 Chevy 210 4-door sedan
    1961 Willys CJ3B Jeep
    2001 Porsche Boxster S
    2003 Chevy Silverado 2500 HD Duramax

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •