Just joined? Please introduce yourself.
Results 1 to 4 of 4

Thread: 1955 Wagon - Help

  1. #1
    Registered Member
    Join Date
    Jul 2017

    Member #:3477
    Posts
    370

    1955 Wagon - Help

    So I am curious if there is a trick to this and I thought I would ask you guys.

    I am installing the side 1/2 roll down windows in the 2-door wagon. Used the same steps as on the doors. Greased the rollers, spun the regulator down with the main roller channel installed. Inserted window. Brought regulator up to slot the roller tack to window track, and ............

    realized I couldn't get to the 4 screws that secure the window track to the roller channel. Is there a trick to the window install or do I need to lay on the floor of the wagon and contort to get the screws in?

    The doors weren't an issue because there were access holes to install the screws. I have a hunch there isn't a trick its just a #$%^(*&* job.

    Any wisdom gentleman?

    Scorp

  2. #2
    Registered Member
    Join Date
    Jul 2017

    Member #:3477
    Posts
    370
    And the secret is......

    Put the right window in Curve to curve and straight in back. Opposite to the door. Its a headache putting the driver window in the passenger quarter.

    Ok done for tonight.

    Scorp

  3. #3
    Registered Member carls 56 (RIP 11/24/2021)'s Avatar
    Join Date
    Jan 2011

    Member #:33
    Location
    Culpeper, Va.
    Posts
    1,857
    you did good.
    ARMY NAM VET, very proud!

    56 210 4dr

    drive and enjoy them while you work on them, life is to short.

  4. #4
    Registered Member MP&C's Avatar
    Join Date
    Dec 2013

    Member #:2017
    Location
    Southern MD
    Posts
    1,290
    Thanks for sharing the solution!
    Robert



    MP&C Shop Projects-Metalshaping Tutorials


    Instagram @ mccartney_paint_and_custom


    .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •