can anyone tell me how restore parts back to orginal condition, like master cylinder, natural finish, wiper motors ?
can anyone tell me how restore parts back to orginal condition, like master cylinder, natural finish, wiper motors ?
Pretty sure the master cylinder was just bare cast iron originally. I think most restorers paint them with cast iron paint that you can get from Eastwood. Not sure of the original wiper motor finish but a few guys here are experts on that stuff.
56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension
Other vehicles:
56 Chevy 2-door BelAir sedan
56 Chevy 210 4-door sedan
57 Chevy 210 4-door sedan
1962 327/340HP Corvette
1961 Willys CJ3B Jeep
2001 Porsche Boxster S
2003 Chevy Silverado 2500 HD Duramax
2019 GMC Sierra Denali Duramax
For cast iron finish use Calyx. Its amazing stuff. Put it on with a toothbrush and rub it out with a rag. If it wears off just rub it a little with a rag. It is so much less of a hassle than paint. Its what you want if you are seeking a cast iron finish.
You can get it through Eastwood:
https://www.eastwood.com/calyx-manif...ting-3-oz.html
For other items you will probably need to clearcoat natural finish stuff like a wiper motor.
Scorp