Just joined? Please introduce yourself.
Classic Edge Designs, LLC Prime Custom Cars, LLC MadMooks
Results 1 to 2 of 2

Thread: Vintageair wiring

  1. #1
    Registered Member Tabasco's Avatar
    Join Date
    May 2012

    Member #:615
    Poolville, Texas

    Vintageair wiring

    Installing my AC. Instructions say to drill a hole in the firewall and connect the hot and ground wires directly to the battery posts. My new AAW classic upgrade wiring harness has this nice big wire marked heater/AC. Do I need to wire directly to the battery or will the wiring from the AAW harness be good enough?

  2. #2
    Registered Member chevynut's Avatar
    Join Date
    Nov 2011

    Member #:115
    Fort Collins, CO
    I didn't run my power or ground directly to the battery. I think that's their CYA thing but all you need is a good power source and a good ground. I connected mine to a 50A breaker and a firewall ground inside the car. They use 12 gauge wires for those connections, which just go to the blower. I think that's way overkill. Another 16 gauge wire supplies power to the ECU and everything else.
    56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension

    You can see my 56 Nomad build here http://www.picturetrail.com/chevynut

    For affordable C4 Corvette Suspension conversions for your car, visit http://www.classicedgedesigns.com

    Other vehicles:

    56 Chevy 2-door BelAir sedan
    56 Chevy 210 4-door sedan
    57 Chevy 210 4-door sedan
    1961 Willys CJ3B Jeep
    2001 Porsche Boxster S
    2003 Chevy Silverado 2500 HD Duramax


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts