Just joined? Please introduce yourself.
Page 1 of 3 123 LastLast
Results 1 to 10 of 32

Thread: Hidden hinge

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Registered Member MadMooks's Avatar
    Join Date
    Jan 2011

    Member #:40
    Posts
    343

    Hidden hinge

    Haven’t done much on the nomad. I got a hidden hinge setup that looks promising. Needs some minor adjustment . I spun off the Buick caballero design. Raised cargo floor 1” or so and tucked the lower part of tailgate under it. Lots of work let me tell ya . I have a video but I can’t load it for some reason . I’m gonna replace tailgate and tailspin because they have been beat up pretty good. I’ve tried 4-5 different hinge setups hard to do when u cant make ur own hinge in house. I used rear hatch hinges off a Denali
    Attached Images Attached Images
    Last edited by MadMooks; 06-18-2019 at 10:41 AM.
    MadMooks 55-57 Nomad Parts
    www.madmooks.com

  2. #2
    Registered Member chevynut's Avatar
    Join Date
    Nov 2011

    Member #:115
    Location
    Fort Collins, CO
    Posts
    10,835
    What happens if someone sits on it? Are you still going to use the cables?

    I would have loved to delete my hinges, but I felt it was too big of a project and I've already done so many mods. Did you ever look at how Kindigit did it on that 55 Nomad? Building custom hinges should be easy for you since you have the machining capability. Building them is the easy part....designing them to work right is the hard part.
    56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension


    Other vehicles:

    56 Chevy 2-door BelAir sedan
    56 Chevy 210 4-door sedan
    57 Chevy 210 4-door sedan
    1962 327/340HP Corvette
    1961 Willys CJ3B Jeep
    2001 Porsche Boxster S
    2003 Chevy Silverado 2500 HD Duramax
    2019 GMC Sierra Denali Duramax

  3. #3
    Registered Member MadMooks's Avatar
    Join Date
    Jan 2011

    Member #:40
    Posts
    343
    Quote Originally Posted by chevynut View Post
    What happens if someone sits on it? Are you still going to use the cables?

    I would have loved to delete my hinges, but I felt it was too big of a project and I've already done so many mods. Did you ever look at how Kindigit did it on that 55 Nomad? Building custom hinges should be easy for you since you have the machining capability. Building them is the easy part....designing them to work right is the hard part.
    I’m gonna still use cables. I need to make a stop tho cuz they are too long now . I can shift the guide up in the quarter towards the front of car or do something else. After all the work I’ve done that problem seems like an easy fix.

    I can’t pull the guys that work for us off making parts for me. Madmooks is priority, this hinge thing is just my hobby . I have 250 pairs of door strikers being run right now. The hidden hinge won’t be something I’ll sell so I didn’t really see that as an option .

    I didn’t see kindigs . I do kno this tho , 55s have the most clearance to the bumper . The way he tucked the bumper and flipped it gave him the best clearance of any car out there . Hot rod dynamics actually just made hinges and will be selling a kit. He did it on a 55 tho and it’s very tight with bumper so id prolly want to see it on a 56/57 before I buy one before I do this to our 57. 57s are even tighter and most guys raise the bumpers because they have gaps with the taillights on the corners. Kudos to those guys for going after it tho. The first design I tried in January worked but the bumper clearance was just too close. Can’t say the Buick idea was the best way to do it , but it is a way to do It.
    MadMooks 55-57 Nomad Parts
    www.madmooks.com

  4. #4
    Registered Member BamaNomad's Avatar
    Join Date
    Nov 2016

    Member #:3217
    Location
    Rocket City, USA (Huntsville, AL area)
    Posts
    3,774
    I agree Gmvette.... once one modifies/changes everything that is 'Nomad'... is it a Nomad any longer?

  5. #5
    Registered Member
    Join Date
    Dec 2018

    Member #:4017
    Posts
    176
    I can understand a small modification such as the tail gate hinges. For anybody that uses their car the hinge will be venerable to rust due to the movement over the pin with moisture. Yes one can keep on it and avoid the brown. A reconfigured internal hinge will look better. Is it 57 Chevy Nomad looking..... no. But does it total detract from the Nomad look....not really. But on the other hand the handle and button is all Nomad and if removed/changed it subtracts from the overall function, feel and look of a Nomad.

    IMHO a Nomad needs to look and feel Nomad. Things like brakes, steering, engine, tranny, rear end, exhaust, added gauges, seat covers/interior, adding air, and paint don’t detract from it being a Nomad. But bucket seats, added console, removed chrome trim/bumper, and big ass custom wheels that don’t fit the wheel well anywhere near normal does affect the Nomad look. Again IMHO too low and big ass wheels sucks. They don’t fit the time period of the Nomad. But if the owner likes it....it is his car and can do as he/she likes.

  6. #6
    Registered Member BamaNomad's Avatar
    Join Date
    Nov 2016

    Member #:3217
    Location
    Rocket City, USA (Huntsville, AL area)
    Posts
    3,774
    I'd want to wear a mask to drive it, and HOPE it didn't break down before I could drive it into a closed up garage *or a river*..

  7. #7
    Registered Member MadMooks's Avatar
    Join Date
    Jan 2011

    Member #:40
    Posts
    343
    Just more info . G3 used Silverado rear door hinges with a double pivot . I didn’t really want to cheat off his setup but it does work. He doesn’t have cables so I’m guessing they weren’t long enough . If the tailgate goes out and down , you’r cable will be too short . I guess there’s pros and cons to each setup . The 275k 56 nomad at Barrett used s10 hinges. The tailgate isn’t really flat or close to factory flat. He had the clearance tho to make it flat, but I guess didn’t want to lengthen cable .
    MadMooks 55-57 Nomad Parts
    www.madmooks.com

  8. #8
    Registered Member chevynut's Avatar
    Join Date
    Nov 2011

    Member #:115
    Location
    Fort Collins, CO
    Posts
    10,835
    Quote Originally Posted by MadMooks View Post
    Just more info . G3 used Silverado rear door hinges with a double pivot . I didn’t really want to cheat off his setup but it does work. He doesn’t have cables so I’m guessing they weren’t long enough . If the tailgate goes out and down , you’r cable will be too short . I guess there’s pros and cons to each setup . The 275k 56 nomad at Barrett used s10 hinges. The tailgate isn’t really flat or close to factory flat. He had the clearance tho to make it flat, but I guess didn’t want to lengthen cable .

    Wow, after the hundreds of thousands of dollars those guys spent on those cars, I can't believe a simple, cheap custom cable was such a big deal.

    If you're not going to sell them, why didn't you just copy G3? I haven't seen that car in person but I talked to Jose at Ogden Chrome about it at length. I guess I see the satisfaction in coming up with your own design, though.

    I don't think bumper clearance is an issue.....if you eliminate the guards....like you should.
    56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension


    Other vehicles:

    56 Chevy 2-door BelAir sedan
    56 Chevy 210 4-door sedan
    57 Chevy 210 4-door sedan
    1962 327/340HP Corvette
    1961 Willys CJ3B Jeep
    2001 Porsche Boxster S
    2003 Chevy Silverado 2500 HD Duramax
    2019 GMC Sierra Denali Duramax

  9. #9
    Registered Member MadMooks's Avatar
    Join Date
    Jan 2011

    Member #:40
    Posts
    343
    Quote Originally Posted by chevynut View Post
    Wow, after the hundreds of thousands of dollars those guys spent on those cars, I can't believe a simple, cheap custom cable was such a big deal.

    If you're not going to sell them, why didn't you just copy G3? I haven't seen that car in person but I talked to Jose at Ogden Chrome about it at length. I guess I see the satisfaction in coming up with your own design, though.

    I don't think bumper clearance is an issue.....if you eliminate the guards....like you should.

    I guess you could say I copied Buick haha. I just wanted the challenge of doing something no one has done . Weird to say because I coulda saved a ton of time just going with the G3 setup. I’m glad I didn’t tho, it exercised my brain to figure this setup out.

    Bumper clearance is definitely an issue. It’s almost a must to suck the bumper close to the body . That center tailgate bar is the issue , at least with what I saw. No chance in hell guards will work , well unless you did it my way but I don’t want guards. G3’s bumper looks weird at the top to me almost like they changed the curvature . They might have run into a bumper clearance as well.
    Attached Images Attached Images
    Last edited by MadMooks; 06-18-2019 at 01:31 PM.
    MadMooks 55-57 Nomad Parts
    www.madmooks.com

  10. #10
    Registered Member MadMooks's Avatar
    Join Date
    Jan 2011

    Member #:40
    Posts
    343
    Here’s the G3. Pretty heavy duty
    Attached Images Attached Images
    MadMooks 55-57 Nomad Parts
    www.madmooks.com

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •