Just joined? Please introduce yourself.
Classic Edge Designs, LLC Prime Custom Cars, LLC MadMooks
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21

Thread: New Guy in Jersey

  1. #11
    Registered Member
    Join Date
    Aug 2019

    Member #:4199
    Posts
    19
    cant get pics to work ...does this forum have issues with cell phone pics ? i went to FAQs just resized and still get Blue ? mark no image

  2. #12
    Administrator 567chevys's Avatar
    Join Date
    Oct 2010

    Member #:3
    Location
    Kelso,Washington
    Posts
    2,047
    Welcome to the site Jerseyboy ,
    Did you get me email from me few days ago ?
    I think Ian Fixed the problem on here .

    Thanks Sid

    1955 2 DR Post
    1937 Chevy Coupe
    2019 Ford Suoer Duty F350
    2018 Ford Explorer
    1955 Chevy Nomad
    1934 Plymouth PE Coupe

  3. #13
    Registered Member chevynut's Avatar
    Join Date
    Nov 2011

    Member #:115
    Location
    Fort Collins, CO
    Posts
    9,997
    You can get a tank for a lot cheaper than $300.

    https://www.danchuk.com/ItemForm.aspx?Item=10853
    56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension

    You can see my 56 Nomad build here http://www.picturetrail.com/chevynut

    For affordable C4 Corvette Suspension conversions for your car, visit http://www.classicedgedesigns.com

    Other vehicles:

    56 Chevy 2-door BelAir sedan
    56 Chevy 210 4-door sedan
    57 Chevy 210 4-door sedan
    1961 Willys CJ3B Jeep
    2001 Porsche Boxster S
    2003 Chevy Silverado 2500 HD Duramax

  4. #14
    Registered Member
    Join Date
    Aug 2019

    Member #:4199
    Posts
    19
    I see its fixed thank you very much I have to check my junk mail email didnt get thru but mission accomplished

  5. #15
    Registered Member
    Join Date
    Aug 2019

    Member #:4199
    Posts
    19
    thanks chevy nut I found this one
    https://www.ebay.com/itm/352537335498

  6. #16
    Registered Member
    Join Date
    Aug 2019

    Member #:4199
    Posts
    19
    Thanks to all here for the advice ....last night I was successful(pulling plug and emptying tank) disconnecting gas line sending unit wire fill tube I cut the straps dropped the rear as far as it would go with the shocks removed .....just not enough. I have a small bottle jack and put it between the frame and rear and was able to get a little more room on one side but not enough. Im going to get another small jack and try the other side and see if the tank will come out. If not ...looks like i will drop the drive shaft loosen U bolts and slide rear forward on perches ....any thoughts , advice, recomendations are welcome
    .
    Attached Images Attached Images

  7. #17
    Registered Member BamaNomad's Avatar
    Join Date
    Nov 2016

    Member #:3217
    Location
    Rocket City, USA (Huntsville, AL area)
    Posts
    1,378
    It seems that you are going about it with the right approach; hopefully you're not a smoker with those open containers of gasoline..

  8. #18
    Registered Member busterwivell's Avatar
    Join Date
    Dec 2016

    Member #:3249
    Location
    Sahuarita (Tucson), AZ
    Posts
    206
    Quote Originally Posted by Jerseyboy View Post
    Thanks to all here for the advice ....last night I was successful(pulling plug and emptying tank) disconnecting gas line sending unit wire fill tube I cut the straps dropped the rear as far as it would go with the shocks removed .....just not enough. I have a small bottle jack and put it between the frame and rear and was able to get a little more room on one side but not enough. Im going to get another small jack and try the other side and see if the tank will come out. If not ...looks like i will drop the drive shaft loosen U bolts and slide rear forward on perches ....any thoughts , advice, recomendations are welcome
    .
    you will have to move it forward.

  9. #19
    Registered Member
    Join Date
    Aug 2019

    Member #:4199
    Posts
    19
    Quote Originally Posted by busterwivell View Post
    you will have to move it forward.
    so i assume you agree with my ...drop the drive shaft take the u bolts off or loosen enouhg to slide the whole deal forward on the perches ?

  10. #20
    Registered Member
    Join Date
    Aug 2019

    Member #:4199
    Posts
    19
    Quote Originally Posted by BamaNomad View Post
    It seems that you are going about it with the right approach; hopefully you're not a smoker with those open containers of gasoline..
    no smoking ,,,,quit 15 years ago ...I got that varnish outside after the picture and bottled up....

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •