yes, then the tank install is pretty easy and then it's just reinstall.
yes, then the tank install is pretty easy and then it's just reinstall.
thanks for all the help I stubborn so I went ahead purchased another bottle jack and tried to squeeze enough room by jacking the rear down from the frame someone said drop the shocks might give you the room......not enough ....so I finally dropped the drive shaft removed the u-bolts slid the rear forward and like magic the tank dropped out thanks for yours and Chevy nuts advice I order a tank friday 8W3rBLCuT0O8noUiBi74jQ.jpgp03SDAsCQQew8r9sdQsQeQ.jpgRQu2hgfMTr6VAJNwKumgjg.jpg ....install hopefully goes smooth
thanks BamaNomad mission accomplished
LOL! My friend was just as stubborn, but we had the same outcome.
ef%PLJyBRkiRowoQohPdWg.jpg new tanks in
Good for you! Progress!
fired her up over the weekend a little noisy after all these years .... good news is put her in drive and with no hesitation at all drove out of the garage bad news is put her in reverse and nothing ....I moved the shifter beteween P and N to see if I could catch something ...but nothing. I do remember when we were removing her from the garage the first time I tried to get it out of park it was stuck and I had to pull down hard to get her to release from Park. Im hoping that the linkage needs adjusting and was too late last night to start that process. Any thoughts coments or recomendations are welcomed PLEASE andThanks in advance
well done Jersey, your making nice progress.
ARMY NAM VET, very proud!
56 210 4dr
drive and enjoy them while you work on them, life is to short.
thanks Carl I found reverse....im just a dumb A$$
EV9p8Ij%Rv6blbOmPSy24w.jpgwaiting on radiator record