Just joined? Please introduce yourself.
Classic Edge Designs, LLC Prime Custom Cars, LLC MadMooks
Results 1 to 4 of 4

Thread: Upholstery stapler

  1. #1
    Registered Member Belair-o's Avatar
    Join Date
    Jun 2013

    Member #:1723
    Location
    Franktown, CO
    Posts
    183

    Upholstery stapler

    I thought the following might be of value to others doing upholstery work on their cars.
    I have been working on installing the headliner on my 57. I found that my air stapler was blowing the staple thru the headliner fabric, running at 65psi (a pressure that had worked well when I was previously working on windlace installation). I kept backing off the air pressure, until I found I the staples didn't blow thru, which was at around 35psi. After a while, I then found that the blade that drives the staples wasn't fully retracting into the tool, so the staples couldn't slide under the blade, and be driven. I thought there was something wrong with the stapler; when I called the customer support number, the tech said I needed at least 45psi to properly cycle the stapler. That would put me back to blowing the staples thru the fabric. He told me some people stapling fabric had success by grinding a bit off of the end of the blade that drives the staples. I took off about 1/16", and then a tad more. The stapler now cycles properly (@45psi), and doesn't blow the staple thru the fabric.
    Regards, Doug

  2. #2
    Registered Member BamaNomad's Avatar
    Join Date
    Nov 2016

    Member #:3217
    Location
    Rocket City, USA (Huntsville, AL area)
    Posts
    1,634
    Good tip... What brand stapler and staples are you using?

  3. #3
    Registered Member WagonCrazy's Avatar
    Join Date
    Mar 2012

    Member #:530
    Location
    Santa Clarita, CA
    Posts
    1,261
    Fantastic feedback here. I had never thought of all of that. I have an electric stapler but havent used it (yet) for any upholstery. I wonder if it's got any adjustability to the force of stapling.
    Good sluething and thank you for posting that for us all.
    1957 Nomad- LS1/T56 on C4 chassis
    1959 Fleetside Apache 1/2 ton, shortbed, big window, 327ci.

  4. #4
    Registered Member Belair-o's Avatar
    Join Date
    Jun 2013

    Member #:1723
    Location
    Franktown, CO
    Posts
    183
    Quote Originally Posted by BamaNomad View Post
    Good tip... What brand stapler and staples are you using?
    It is a Spot Nails stapler (https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1). I have been using Spot Nails staples also. For the windlace, I used 3/8", for the headliner front and back, I am using 1/4", and on the headliner sides, using 3/8".
    I was real pleased with the Spot Nail customer support. While we were on the phone, he didn't remember what pressure minimum was needed (not in the instructions), so he hooked up the same stapler as I have, and experimented until he observed the minimum pressure needed for the stapler to operate correctly.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •