Just joined? Please introduce yourself.
Results 1 to 2 of 2

Thread: driveline issues

  1. #1
    Registered Member
    Join Date
    Jun 2013

    Member #:1756
    Posts
    63

    driveline issues

    did anyone have the same problem when using the aluminum 621 bellhousing and bracket that bolts to bellhousing that the pivot ball attachets to and have the rod that pushes the fork on a steap angle. do they make an offset clutch fork rod for this problem. any help would be greatly appreaciated.
    Last edited by mikes55; 06-08-2020 at 07:16 PM.

  2. #2
    Banned
    Join Date
    Mar 2016

    Member #:2941
    Location
    Galt's Gulch
    Posts
    2,419
    Mike, unless you are going to hydraulic clutch actuation, why not stick with the original cast-iron '55 - '57 bellhousing and clutch linkage pieces that are matched with your year car?

    Happy Motoring,

    Harry

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •