Just joined? Please introduce yourself.
Classic Edge Designs, LLC Prime Custom Cars, LLC MadMooks
Results 1 to 7 of 7

Thread: Vintage Air

  1. #1
    Registered Member oldybutgoody's Avatar
    Join Date
    Jul 2020

    Member #:4409
    Location
    Mckinney Tx
    Posts
    10

    Vintage Air

    Can anyone recommend someone in the Dallas/Ft Worth area, that you had a good experience with, to install a Vintage Air A/C into my ‘55 ?

    383 Stroker, 700r4, Ford 9”

  2. #2
    Registered Member Chevy Chase's Avatar
    Join Date
    Jul 2020

    Member #:4426
    Location
    SF Bay Area, CA
    Posts
    59
    IMG_1413 (2).jpgIf you are mechanically inclined, and cannot find a shop to install a/c, do it yourself. I had never installed a/c in a car before installing a/c in my 68 Camaro which was a non-a/c car. Had to read the instructions six times. Scratched my head a lot. It was time consuming. Took it to a shop that evacuates and charges the system. The shop owner asked if It was my first time installing an aftermarket a/c system. I said yes. He quoted me $125 to evacuate the system and charge it. He replied, we'll know soon if you did it right. Thirty minutes later, he said "by Golly it blows cold. I'm only charging you $110 as a professional courtesy." He liked the concealed custom made hoses to the firewall. So, give it a try if you like challenges and want to save $$$.

  3. #3
    Registered Member 55mike's Avatar
    Join Date
    Mar 2012

    Member #:225
    Location
    Annabella Utah
    Posts
    161
    I did mine as well. It was rather challenging especially since my car was effectively "done"... lots more stuff to work around, especially getting the stock defrost ducts out (Mr. Sawzall helped with that).
    This said, careful study of the instructions, and a good dose of patience coupled with some basic skills will prove fruitful, and save considerable $$$

  4. #4
    Registered Member Tabasco's Avatar
    Join Date
    May 2012

    Member #:615
    Location
    Poolville, Texas
    Posts
    301
    You can go to Vintage Air Website and click on "distributors". You put in your zip code and it will tell you who is local to you. It will tell you if they are installers or not.

  5. #5
    Registered Member busterwivell's Avatar
    Join Date
    Dec 2016

    Member #:3249
    Location
    Sahuarita (Tucson), AZ
    Posts
    293
    I agree with Chevy Chase. I had never installed AC before I did it in my 71 Chevy pickup. Took some time, and, yes, rereading the instructions a number of times. Since then, I've put in a 56 Studebaker wagon, my 66 Chevelle, my 56 210, and will soon be doing my son-in-law's 67 Chevelle. It gets easier every time, but the satisfaction of doing it yourself is worth it. Give it a go.
    P.S. remove the front seat to do it, I'm too old to try and work around it.

  6. #6
    Registered Member BamaNomad's Avatar
    Join Date
    Nov 2016

    Member #:3217
    Location
    Rocket City, USA (Huntsville, AL area)
    Posts
    2,187
    Agreed! I didn't have room in my garage to remove the front seat when I was reworking my Vintage Air, so I just undid it and 'moved it back' as far as I could - til it hit the rear seat! We old guys need a little more space and minimizes the contortions we have to go thru!~

  7. #7
    Registered Member Rocketman's Avatar
    Join Date
    Jul 2017

    Member #:3454
    Location
    Rowlett (DFW), TX
    Posts
    159
    I used McCains in Richardson for years. Great and honest folks. I just looked them up and they have been bought by Davis Automotive. They still get very good reviews. Here is a link. https://www.mydavisauto.com/

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •