-
Member
static compression ?
I'm pondering the idea of putting a stroker rotating assembly in my vortec 350. Living at 5000ft elevation, i'm thinking of going with a piston that will give 10:4 static comp ratio, Over the 9:8, because of the elevation. Am i thinking wrong on this, or should i stick with the 9:8 setup?
-
Should be fine, would be even at a lower elevation with the Vortec heads, which can stand a higher compression ratio than other OEM heads.
-
Member
Thanks Rick didn't know that about the vortec heads.
-
It's due to the "heart shaped" combustion chambers. You also should run about 4° less timing with them too.
-
Member
Yes have been running the vortec 350 with 32 total degrees.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules