I'm looking for a center mount, internal wiper motor. I cannot use Raingear due to my clutch master cylinder push rod.
Any ideas?
I'm looking for a center mount, internal wiper motor. I cannot use Raingear due to my clutch master cylinder push rod.
Any ideas?
There's a couple of others, such as Specialty Power Windows. No idea on whether it would be better for you. Have you looked at Newport? They make an electric wiper conversion that uses the stock cables. Would that work?
Of course your other option is to re-do your clutch master cylinder to clear the wiper system. Probably several options there.
Why would the clutch MC rod interfere with the Raingear unit? What clutch setup are you using? It seems like the Raingear levers are way above the pedal clutch assembly.
Here's mine showing the Raingear levers and the brake/clutch brace.
09210005.JPG
56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension
Other vehicles:
56 Chevy 2-door BelAir sedan
56 Chevy 210 4-door sedan
57 Chevy 210 4-door sedan
1962 327/340HP Corvette
1961 Willys CJ3B Jeep
2001 Porsche Boxster S
2003 Chevy Silverado 2500 HD Duramax
2019 GMC Sierra Denali Duramax
It would appear his car has a custom (NOT stock) 'hydraulic clutch' with master cylinder; it would depend on where/how it's all mounted as to 'interference'...?
I don't know what hydraulic clutch could be that high in a 55-56, but this one won't work in a 57:
https://www.classicchevy.com/chevy-h...xoCklEQAvD_BwE
56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension
Other vehicles:
56 Chevy 2-door BelAir sedan
56 Chevy 210 4-door sedan
57 Chevy 210 4-door sedan
1962 327/340HP Corvette
1961 Willys CJ3B Jeep
2001 Porsche Boxster S
2003 Chevy Silverado 2500 HD Duramax
2019 GMC Sierra Denali Duramax
The Specialty Power Windows wiper setup allows you to mount the drive motor just about anywhere. We planned to use one on the Hemi55 since I had to re-locate the brake master cylinder to where the Raingear would go. BTW, if you want to buy a Raingear I think Steve would sell the one for his Hemi55 since he can't use it. I could ask what he wants for it...it's new.
56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension
Other vehicles:
56 Chevy 2-door BelAir sedan
56 Chevy 210 4-door sedan
57 Chevy 210 4-door sedan
1962 327/340HP Corvette
1961 Willys CJ3B Jeep
2001 Porsche Boxster S
2003 Chevy Silverado 2500 HD Duramax
2019 GMC Sierra Denali Duramax
Thanks guys.... I have a Rain Gear. It looks to be an interference fit. Guess I'll do the install and see just what interferes rather than eyeball it.
My clutch master push rod exits on the driver side of the steering column. Not the right side like stock. Looking at the firewall, the master is right of the hydra boost. I am however using a modified stock petal mount like chevynut.
56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension
Other vehicles:
56 Chevy 2-door BelAir sedan
56 Chevy 210 4-door sedan
57 Chevy 210 4-door sedan
1962 327/340HP Corvette
1961 Willys CJ3B Jeep
2001 Porsche Boxster S
2003 Chevy Silverado 2500 HD Duramax
2019 GMC Sierra Denali Duramax
I mounted the rain gear unit with the clutch master cylinder on the driver side of the pedal assembly on my 56, modifying the clutch pedal so the rod will work on that side. I also have a hydra boost unit. The rod adjuster is close to the rain gear motor, but everything just clears. I don’t have pictures, but I could take a couple, if that helps.
Been tinkering and installing, looking real close. Turns out, where I choose to mount the clutch master is directly in front of the RG wiper motor. I've also looked at the SPW unit and it looks like a winner. Gets good reviews and easy to install comments. SPW looks like my answer.