Justin, there are no rules on selling here, and you don't have to be a sponsor...in fact there are no sponsors.
Justin, there are no rules on selling here, and you don't have to be a sponsor...in fact there are no sponsors.
56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension
Other vehicles:
56 Chevy 2-door BelAir sedan
56 Chevy 210 4-door sedan
57 Chevy 210 4-door sedan
1962 327/340HP Corvette
1961 Willys CJ3B Jeep
2001 Porsche Boxster S
2003 Chevy Silverado 2500 HD Duramax
2019 GMC Sierra Denali Duramax
We have two lines of Radiators and Cooling Fan assemblies:
1. Engineered Cooling Products: All-Aluminum, period correct style, very cost-effective, and come with a lifetime warranty! Call Frank at 773.599.3067, or Justin at 773.303.8251 for your needs! www.SpeedCooling.com
2. Entropy Radiator: Fully Fabricated in the USA, All-Aluminum, Lifetime Warranty, and available with or without a fabricated dual or single fan setup. Available in SBC, BBC, and LSx engine configurations.
Call me(Justin) at 773.303.8251 for your custom setups as well! www.EntropyRad.com
Justin Novick
Support
Engineered Cooling Products
"The Best Cooling Guarantee for your American Hot Rod"
(773) 303-8251 - www.SpeedCooling.com
Justin: ECP is off shore?
I don't see a radiator for tri fives at the Entropy site. Any pics of a trifive radiator from there.
Do you have a cross flow with a condenser and fan set up? Not ls motor.
Thanks
You'd do well to have a crossflow package with optional fans for a 55-57. And the package should have options for either traditional engines or LT/LS engines with the smaller hose barbs and provisions for the steam lines. Bolt in radiators are fine but the market for crossflow radiators for our cars is equally big IMO.
I personally think there's a lot more guys using cross-flow radiators than the stock-style ones.
56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension
Other vehicles:
56 Chevy 2-door BelAir sedan
56 Chevy 210 4-door sedan
57 Chevy 210 4-door sedan
1962 327/340HP Corvette
1961 Willys CJ3B Jeep
2001 Porsche Boxster S
2003 Chevy Silverado 2500 HD Duramax
2019 GMC Sierra Denali Duramax
Rick
They do offer this for a up charge over there stock units. I was quoted 750$ for LS size tubes and steam port. Tubes can be placed to your liking center side etc....
http://www.speedcooling.com/1955-195...n/prod_54.html
They have a chrome fan setup for about 50$ more than one in link.
Question: Do the cross flow styles allow you to keep your horns in the stock location?
Last edited by rockytopper R.I.P 5-13-2017; 01-29-2015 at 09:33 AM.
Depends on how wide but the usual 27" with two 3" tanks - 33" wide overall - doesn't leave room for stock horns. They are easy enough to relocate.
Coming soon to a theater new you...Lots of great things for the Tri-5 Cars..
Entropy does make fully-fabbed radiators for the Tri-5's and I'm pushing for a website update on them. I believe we should have ls-swapped radiators in stock for them. Even if we have to build you a radiator to spec, you're looking at 14-21 days at most
I'll be happy to get anyone pricing on any application!
773.303.8251
Justin Novick
Support
Engineered Cooling Products
"The Best Cooling Guarantee for your American Hot Rod"
(773) 303-8251 - www.SpeedCooling.com
Justin Novick
Support
Engineered Cooling Products
"The Best Cooling Guarantee for your American Hot Rod"
(773) 303-8251 - www.SpeedCooling.com