I have a 1957 chevy belair that I am putting back together. I have converted to HEI ignition I need help wiring so that I can obtain spark while cranking and when started. I took the resistor block off and was thinking connect all of the wires from the block together should work. that is 2 tans and 2 green wires together. But I need help as I want to make sure I am on the correct path to setting up the hei distributor with stand alone coil. I then have the wires from distributor running up to coil + and - . I am thinking I need to run a 14 gauge wire from back of starter switch to HEI coil + but the question is which lead to hook up to and am I thinking corect. please respond to williabass@yahoo.com if you have an answer for me on the proper wiring of an HEI distributor on a 57 chevy.
Thanks
BILLR57