My battery is mounted in the trunk. Looking to bring the same size cable from my connection on the frame in the rear of my car to the front and mount on the starter. Has anyone heard of a stud for this application? I have been told there is less resistance since its mounted on the starter and will provide a mounting point to other grounds. The two ground wires from the Vintage Air Gen IV is supposed to connect directly to the battery. This would be a shorter run for that application. When I rewired the car (AAW) I put in (3) ground straps one on the front engine block to frame, one on the rear of engine to the frame and one on the transmission crossmember. Furthermore, I ran a ground wire from the rear of the housing on my chrome alternator to the frame too.