Any one else have a hood clearance problem on a 57 Chevy? I moved my V8 radiator to the 6 cyl position. Bought all the hoses and brackets and shroud. Before I slammed the hood, I thought I would check to see if it closed OK. It did not. I put some chalking compound on the radiator cap. It mashed it flat. I have the radiator as far down as it will go. The upper neck is on top of the support bar. I called Danchuck tech support. He said some 57s had a clearance problem. He suggested to cut the support bar. I told him this is what holds the front end together and I didn't want to cut it. He said he wouldn't cut his either. If any one has had this problem, what did you do to fix it?