In the process of installing CPP 500 power steering gear and pump/pull. Some questions/statements---I have very little clearance between fan and the lower pulley needed for the p/s pump---had to remove chrome crank timing cover to get fan to clear. installing the pump--I found that the fan hits the pump pulley unless it is almost all the way out to the end of the adjustment--is this normal. the pulleys seem to line up---the p/s pump bracket that replaced the front motor mount had to be modified a little in order to fit properly. I know I will have to cut the fan shroud--will probably make it a half fit. Don't really feel like moving the fan any closer to the radiator or feel that I should have to. Is this
normal? I haven't tackled the steering gear and column yet and in reality could take all off and try to sell it if more problems are on the horizon----Does anyone have the NAPA or Gates part number for the p/s belt needed...THANKS