57 Nomad frame shim 2 (Copy).JPG57 Nomad frame shim1 (Copy).JPGNomad frame shim -cross sec view (Copy).JPGI came across some photos I'd taken of my original strips (removed from my 57 Nomad when I took the body off the frame long ago). The dimensions of the strip are: 6" L x 1.25" W x~1/4" T . They have 4 ribs on one side and 3 on the other. Four are used on the rear of the frame to isolate frame to body contact during body-frame flexing. When I removed the body from the frame, these strips were still 'stuck' to the frame, but they pulled right off with little effort...

Here are a few photos...