Looking to see if anyone building a nomad can help me get a measurement. I'm trying to cage the interior of my car so I can lift the body off of the frame and put it on my rotisserie. My drivers side interior and exterior quarter has extensive rot, its separated from both the outer and inner rocker, and I would like to get it as close to where it should be before I weld in the braces.

The measurement I need is inside to inside of the door jamb. 16" down from the centerline of the interior most bolt hole on the striker plate. Below are photos to illustrate what I'm looking for, and help will be greatly appreciated.

I have worked on getting the jamb/inner quarter back to where I think it should be with clamps, and I came up with 64.5" inside to inside.