stroker
12-03-2012, 10:41 PM
Wanna thank chevynut, Rick L, and warran57 for their input to my query about washer pumps. I had stuff to clean today so I went out and removed the filter and the pump worked just fine. The three way valve works perfect so I can use brush, spout, or both. I don't like being beat so the battle isn't over yet. I'm still going to find a way to use the filter when I have time. I'll add I have previously put a raised screen in the tank so most of the debris drops through it to the bottom of the tank, and I have a large filter before the intake on the pump. I just want that clear look to the solvent. Yes, it's stoddard. I'd love to be green, but green don't clean. I grow a beard by the time the aquaus ? stuff works. Anyway, after that I finished preping the interior side of the firewall, primed and sealed it. Removed the sealer from the joints on the cowl and door pillers and will redo them with the 3m body sealer I bought. After a bit of spot blasting tomorrow I will prep and primer the engine side of the firewall.
108910901091
108910901091