View Full Version : SPOT WELD DRILLS
NickP
04-03-2013, 11:20 AM
I am using the Blair's units on a present customer project to remove panels. What type/brands have others had sucsess with? Links?
http://www.blairequipment.com/Spotweld_Cutters/images/both-premium-spotweld-new.jpg
Run-em
04-03-2013, 11:29 AM
Skip proof from Eastwood.
chevynut
04-03-2013, 11:37 AM
I just use my die grinder with a carbide burr.
Maddog
04-03-2013, 03:42 PM
I didn't know there was a "skip proof" type. I use the other and I do have to use a punch, punched a little deep to keep the cutter from skipping. I bet that skip proof is kind of expensive.
Rick_L
04-03-2013, 04:51 PM
I've been using a Wivco bit. Similar to the Blair. You can renew the pilot bit, and you can sharpen the primary bit by flat grinding or belt sanding. You can probably do this with the Blair also, don't know for sure.
I bought mine at autobodystore.com.
Personally I can't imagine using a die grinder and carbide burr if I was trying to save one of the panels being separated - relative to a cutter made for the job.
I don't like the "mini hole saw" bits as they don't usually have a decent pilot, they can't be sharpened, and they can skip. The Blair and Wivco won't skip.
chevynut
04-03-2013, 08:01 PM
Personally I can't imagine using a die grinder and carbide burr if I was trying to save one of the panels being separated - relative to a cutter made for the job.
I've done it a million times....for me it's "made for the job". ;)
It's easy to save the "back" panel, harder to save the "front" one without making a big hole.
smooth 56
04-04-2013, 08:42 AM
I am using the Blair's units on a present customer project to remove panels. What type/brands have others had sucsess with? Links?
http://www.blairequipment.com/Spotweld_Cutters/images/both-premium-spotweld-new.jpg
NCW where do you get the skip proof I like the look's of that one.Have tryed the other one did not like it.
NickP
04-04-2013, 08:59 AM
NCW where do you get the skip proof I like the look's of that one.Have tryed the other one did not like it.
http://ecx.images-amazon.com/images/I/4160jnMo49L.jpg
http://www.amazon.com/Blair-Tools-ROTOBROACH-KIT-SKIP-CUTTERS/dp/B00397OHLO
smooth 56
04-04-2013, 09:20 AM
Thank's buddy with all the build a body's that I have been working on I need one.:cool:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.